Salt Wall Project Timeline: From Order to Install

A salt wall project moves through eight phases: measure, confirm the wall, plan lighting, order, receive and inspect, dry lay, install, then cure and finish. Most of the calendar time comes from wall prep, lighting work and delivery, not from setting the salt. As a rough planning estimate, the hands-on install for a small panel is often about a day and a 6 x 8 ft wall about 1 to 3 days, plus adhesive cure time. This guide shows what happens in each phase, who sets each timing, and what the pink salt wall materials cost for two example walls.

Salt Wall Timeline at a Glance

The table below is a planning tool, not a schedule. The "planning range" column is a rough estimate based on common project steps; your contractor, electrician and delivery details decide the real dates.

Phase	What happens	Who sets the timing	Planning range (estimate)
1. Measure and count	Measure the wall, find sq ft, count pieces	You	About an hour to a day
2. Confirm wall and backing	Check load, backing board, base support	Your contractor	Varies by project
3. Plan lighting and power	LED layout, driver location, wiring	A licensed electrician	Varies by project
4. Order salt and adhesive	Choose tiles or bricks, packs and adhesive	You	Same day once counts are final
5. Receive and inspect	Check boxes and pieces, store dry	Delivery option chosen at checkout	Confirmed at checkout
6. Dry layout	Lay out rows on the floor, plan cuts	You or your installer	A few hours to a day
7. Install	Set rows, cut edges, check level	Your installer	About 1 day (small panel) to 1 to 3 days (6 x 8 ft)
8. Cure and finish	Let adhesive cure, connect lights, add trim	Adhesive label and electrician	Per the adhesive label

Phase 1: Measure the Wall and Count Pieces

Everything else waits on the piece count, so this is the first step. Measure width and height in a few places, multiply to get square feet, subtract openings, then multiply by 4.5 pieces per sq ft. Add about 10% for cuts and breakage. Our step-by-step guide on how to measure a wall for a salt wall walks through a worked example, and the salt tile size guide covers piece dimensions.

Example: a 6 x 8 ft wall is 48 sq ft. 48 x 4.5 = 216 pieces, and 216 x 1.1 = 237.6, so plan on about 238 pieces.

Phase 2: Confirm the Wall, Backing and Weight

Salt is heavy, so the wall check comes before the order. Store data from the product pages: our 8 x 4 x 1 in pink salt tiles weigh about 2.9 lb each, and our 8 x 4 x 2 in pink salt bricks weigh about 5.5 lb each. For about 238 pieces that is roughly 690 lb in tiles or roughly 1,309 lb in bricks.

A contractor can confirm whether the wall, backing board and any base support can carry that load. Follow the adhesive maker's instructions and local building code. The salt wall planning guide lists the questions to ask before work starts.

Phase 3: Plan Lighting and Power Early

If the wall is backlit, the LED layout, driver location and wiring are usually planned and roughed in before any salt goes up, because access is harder later. Book a licensed electrician early, since their schedule can set the pace of the whole project. Our guide to LED lighting options for salt walls explains the main choices. Electrician time and LED costs vary by location and project, so get a local quote.

Phase 4: Order Salt Tiles, Bricks and Adhesive

With the count, the wall check and the lighting plan done, you can order. Tiles are 1 inch thick and lighter. If you prefer the deeper 2 inch profile, you can buy salt bricks in packs from 20 to 100. Browse salt wall tiles for packs from a single tile up to 300.

For adhesive, our pink salt adhesive 3-pack is listed for up to 120 salt bricks, which works out to about 40 bricks per tube. We use that as a planning figure for tiles too; check the product page for your project.

Example Material Costs

These figures use Natural Salt Co. store prices and the lowest pack mix we found for each count. Labor, backing, LED lighting, electrician time and shipping are not included.

Wall	Pieces (with 10%)	Pack mix	Approx. salt cost	Approx. adhesive	Approx. total
4 x 6 ft, pink tiles	119	100 + 10 + 4 + 4 + 1	about $684	about $80 (one 3-pack)	about $764
4 x 6 ft, pink bricks	120	70 + 50	about $674	about $80 (one 3-pack)	about $754
6 x 8 ft, pink tiles	238	200 + 30 + 4 + 4	about $1,293	about $160 (two 3-packs)	about $1,453
6 x 8 ft, pink bricks	238	70 + 70 + 70 + 20 + 8 singles	about $1,344	about $160 (two 3-packs)	about $1,504

Prices checked October 24, 2026. All prices are approximate and can change; see the product page for the current price.

The math: a 4 x 6 ft wall is 24 sq ft, so 24 x 4.5 = 108, plus 10% is about 119. Bricks come in packs of 20 or more, so 120 is the closest count from 70 + 50. Per piece, pink tiles run from about $5.99 single to about $5.33 in the 300-pack. Pink bricks run from about $6.60 single to about $5.53 in the 70-pack; the 100-pack works out to about $5.77 per brick, which is more per brick than the 50 or 70-pack.

Brick kit option for 6 x 8 ft: the sauna brick 200-pack with 6 adhesive tubes (approx. $1,240) plus a 30-pack (approx. $185) and 8 single bricks (approx. $53) comes to about $1,478 for 238 bricks and 6 tubes. That is about $26 less than the loose bricks plus adhesive route in the table.

Phase 5: Receive, Inspect and Store the Salt

Delivery options and timing are confirmed at checkout on naturalsaltco.us. If you have a fixed opening date or a commercial schedule, contact us for a project quote before you order so the delivery fits your plan. Our post on ordering salt tiles in the USA covers weight and what to expect.

When boxes arrive, we recommend opening them soon, checking piece counts and setting aside any damaged pieces. Store salt indoors in a dry space, off the floor if possible, until install day.

Phase 6: Dry Layout Before Install Day

A dry layout on the floor lets you sort pieces by color, plan where veining goes and mark cuts at the edges and around outlets. Doing it while the adhesive and tools are being gathered keeps install day focused on setting rows. Our salt brick wall planning checklist lists the tools and checks to confirm before you start.

Phase 7: Install Day

Install time depends on wall size, cuts, crew experience and whether lighting is part of the wall. As a rough planning estimate, a small 4 x 6 ft panel is often about a day for an experienced installer, and a 6 x 8 ft wall about 1 to 3 days. Treat these as planning ranges, not a quote, and ask your installer for their own estimate.

A level first row matters most, because every row above follows it. Our guide on how to install Himalayan salt tiles covers the steps, and the same order applies to most brick walls.

Phase 8: Cure, Connect Lights and Finish

The adhesive product page does not list a cure time, so follow the label on the tubes and your installer's guidance before adding trim, connecting lights or putting anything against the wall. Once the adhesive has cured, the electrician can finish any LED connections, and you can add trim and clean dust off the face with a dry cloth.

Ways to Keep the Project on Track

• Finish the piece count before you ask for quotes, so every trade works from the same numbers.
• Book the contractor and electrician before you set a delivery date.
• Order the 10% allowance with the main order rather than adding pieces later.
• Do the dry layout while you wait for other trades.
• Leave the full cure time in the schedule instead of rushing the finish.

Plan Your Salt Wall With Us

Have your wall size and target date ready? Browse our salt wall materials, or request a project quote and we can help match the pack mix and adhesive to your wall.